German and Antique Clock Parts


• Home •Cuckoo Clock Parts • Q & A • Directions & Map • Photo Album • Site Map
Tech Support	For questions outside of placing an order tech support is now available; talk to a member of our experienced clock repair staff for the nominal charge of $6.00 for 15 minutes. Please order prior to placing call at 989-652-2933 Monday-Friday 9AM-4:30PM EST
Free Shipping on all order over $60.00
*Clock Oilers and Grease*
	Oiler $2.50 Long needle nose oiling syringe for all clocks. Approximately 1cc of Synthetic Clock Oil (Enough for 10 or more clocks)
	Professional Oiler $5.00 Long needle nose oiling syringe for all clocks. Approximately 1cc of Nye Synthetic Clock Oil (Enough for 10 or more clocks)
	Mainspring Lubricant $1.00 Sold in a syringe (without the needle) with a wider opening for easy dispensing and a resealable cap. Approximately 2mL (Enough for 6 mainsprings)
	Professional Grease $2.50 For use in areas where clock oiling is too light (such as lift arms, lift cams, and lift hammers). It comes in a bellow-type dispenser with a protective cap. Approximately one ounce of grease.
*Books*
	Clock & Watch Trademark Index of European Origin By Karl Kochmann $42.50 An archive of over 35,000 details of trademarks and wordmarks from Switzerland, England, Germany, France and Austria. Many pages of identification information for cuckoo clocks and movements. Includes dates and cities of manufacturer. 989 page hardcover bound book.
	Gustav Becker Story 1847-1927 By Karl Kochmann $13.95 This book is the revised edition of Mr. Kochmann's classic edition on the clocks of Gustav Becker. Becker's beautifully designed, industrially crafted clocks were marketed around the world until World War II and are now known world-wide. This fine book now records the history of the man and his clocks, and identifies the trademarks he used. It is well illustrated using actual Becker catalog images.
	Lenzkirch Clock Factory Winterhalder & Hofmeier Clocks By Karl Kochmann $14.50 This book is the revised edition of Mr. Kochmann's classic volume on the clocks of the Lenzkirch Clock Factory and Winterhalder & Hofmeier Clocks. This book represents another chapter in Mr. Kochmann's continued work to document the industrialized clockmaking in the German Black Forest.
*German European Base Light Bulbs*
		E-14 (14mm Diameter) European Screw Base Bulb $3.50 Each Most often used in German Grandfather Clocks, Cabinets, and Larger German Wooden Ornaments. .125 AMPS, 120V, 15W, 3000 Life Hours, C-3A Filament (Base is slightly larger than 1/2 inch)
		E-12 (12mm Diameter) European Screw Base Bulb $2.50 Each Most often used in German Wooden Ornaments, Pyramids, etc... .125 AMPS, 130V, 15W, 3000 Life Hours, C-3A Filament
		E-10 (10mm Diameter) European Screw Base Bulb $1.50 Each Most often used in German Wooden Ornaments and Pyramids. 14 Volt 3 Watt Light Bulb
*Suspension Springs* *(order taper pins below if needed)*
	HS248/3 $4.00 Hermle/Keininger Suspension Spring for a Grandfather size Wood Stick pendulum. Larger than pictured to the left. Silver color steel upper and lower blocks. Measures 15/32 inch x 1 inch .09mm thick
	HS248/1 $4.00 Hermle/Keininger Suspension Spring for a Grandfather size (Cable Wind) Lyre pendulum. Larger than pictured to the left. Silver color steel upper and lower blocks. Measures 15/32 inch x 1 inch .07mm thick
	HS0062 $3.00 Suspension Spring for Hermle Grandfather Clocks and Large Wall Clocks. Often used on older Ridgeway, Howard Miller, and Emperor Grandfather Clocks. Generally used for larger, heavier pendulums. Measures 5/16 inch x 11/16 inch .05mm thick 2.4mm spring length
	HS0060 $3.00 Suspension Spring for Hermle Wall, Mantel. and Grandmother Clocks. Measures 5/16 inch x 11/16 inch .04mm thick 2.4mm spring length
	US0004 $3.00 Suspension Spring for Jauch and Urgos movements made before 1980. Wall, Mantel, and Grandfather Clocks. Longer flex between metal blocks. Measures 5/16 inch x 23/32 inch .05mm thick
	UW-GF $7.95 Suspension Spring for Urgos Grandfather Clock. Measures 1-11/16 inch .008mm thick
	UW-GM $7.95 Suspension Spring for Urgos Grandmother Clock. Smaller of the two "hook" Suspension Springs. Measures 1-1/8 inch .008mm thick
*Hand Nuts*
	HHN-2 $1.00 Hand Nut for Hermle (German) & Urgos movements manufactured after 1990. Generally used on Mantel and Chain Driven Wall Clocks. Measures approximately 1/4 inch.
	HHN-1 $2.00 Hermle Hand Nut for Grandfather Clocks Measures approximately 3/8 inch.
	UHN-1 $2.50 Small Urgos Hand Nut for Grandmother, Wall, and Mantel Clocks. Measures approximately 1/4 inch diameter. The diameter of the center hole is approximately 1.5mm.
	UHN-2 $2.50 Large Urgos Hand Nut for Grandfather Clocks. Measures approximately 3/8 inch diameter. The diameter of the center hole is approximately 1.5mm.
	UHN-3 $2.50 Urgos Hand Nut with a Large center hole for UW03 series movements. Measures approximately 11mm diameter. The diameter of the center hole is 2mm.
Quartz Hands
	HH05Q $1.00 Black Serpentine style hands for quartz movements. Minute hand length is approximately 2 3/4 Inches. Fits 5 1/2 inch chapter ring.
	HH06Q $1.00 Black Serpentine style hands for quartz movements. Minute hand length is approximately 3 Inches. Fits 6 inch chapter ring.
	HH07Q $1.00 Black Serpentine style hands for quartz movements. Minute hand length is approximately 3 1/2 Inches. Fits 7 inch chapter ring.
	HH08Q $1.00 Black Serpentine style hands for quartz movements. Minute hand length is approximately 4 Inches. Fits 8 inch chapter ring.
	HH07SQ $1.00 Black Spade style hands for quartz movements. Minute hand length is approximately 3 1/8 Inches. Fits 7 inch chapter ring.
	HH09SQ $1.00 Black Spade style hands for quartz movements. Minute hand length is approximately 4 1/4 Inches. Fits 9 inch chapter ring.
Mechanical Hands
	HH06 $7.95 Black Serpentine style hands for mechanical movements. Minute hand length is approximately 3 Inches. Fits 6 inch chapter ring.
	HH08 $7.95 Black Serpentine style hands for mechanical movements. Minute hand length is approximately 4 Inches. Fits 8 inch chapter ring.
	UH08 $7.95 Black Serpentine style hands for URGOS mechanical movements. Out of Production Hands. Minute hand length is approximately 3 7/8 Inches. Fits 8 inch chapter ring. 1.8mm Square Hole (Smaller than Hermle Hands)
	HH10 $7.95 Black Serpentine style hands for mechanical movements. Minute hand length is approximately 4 3/4 Inches. Fits 9 to 10 inch chapter ring.
	UH10 $7.95 Black Serpentine style hands for URGOS mechanical movements. Out of Production Hands. Minute hand length is approximately 4 3/4 Inches. Fits 9 to 10 inch chapter ring. 1.8mm Square Hole (Smaller than Hermle Hands)
	HH05S $4.95 Black Spade style hands for mechanical movements. Minute hand length is approximately 2 1/2 Inches. Fits 5 inch chapter ring.
	HH06S $4.95 Black Spade style hands for mechanical movements. Minute hand length is approximately 3 Inches. Fits 6 inch chapter ring.
	HH07S $4.95 Black Spade style hands for mechanical movements. Minute hand length is approximately 3 1/2 Inches. Fits 7 inch chapter ring.
	HH09S $4.95 Black Spade style hands for mechanical movements. Minute hand length is approximately 4 1/4 Inches. Fits 9 inch chapter ring.
*Winding Keys*
Measure square winding post for fit	Key/3 $3.50 Size 3 Brass key 2.75mm square hole.
	Key/4 $3.50 Size 4 Brass key generally fits Seth Thomas (manufactured 1970 to present) and many 2 holeWall, Mantel, and Ships Bell Clocks. 3mm square hole.
	Key/5 $3.50 Size 5 Brass key Fits many Antique Clocks. 3.25mm square hole.
	Key/6 $3.50 Size 6 Brass key Fits many Antique Clocks. 3.5mm square hole.
	Key/7 $3.50 Size 7 Brass key Fits many Antique Clocks. 3.75mm square hole.
	Key/8 $3.50 Size 8 Brass key generally fits all modern (since 1970) 3 hole German made movement 8 day wall and mantle clocks. Original often chrome silver in color. 4.0mm square winding
	Key/8 Wide $4.50 2 5/8inch wider winding wings make it easier to wind, otherwise same as Key/8above (not pictured) Size 8 Brass key generally fits all modern (since 1970) 3 hole German made movement 8 day wall and mantle clocks. 4.0mm square winding
	Key/9 $3.50 Size 9 Brass key 4.1mm square hole
	Key/10 $3.50 Size 10 Brass key Often fits antique German and anniversary clocks 4.25mm square hole
	Key/11 $3.50 Size 11 Brass key Often fits antique German and anniversary clocks 4.5mm square hole.
	HK/2 $12.95 Size 8 Winding crank for Grandfather clocks. Generally fits most Grandfather clocks made since 1974. 8mm square hole.
*Door Keys*
	HM Doorkey $5.95 Howard Miller Grandfather Door Key. (No notch in key)
	HM Doorkey/2 $5.95 Old Style Howard Miller Door Key for clocks manufactured before 1986. (notch in key)
	HM-Ridgeway $5.95 Old Style key fits most Ridgeway clocks manufactured before 1984. (notch in key)
	Ridgeway Door Key $5.95 Ridgeway Grandfather door key.
*Anniversary Clock Domes*
	GD12 $29.95 Glass Dome for a 12 inch Anniversary clock. (Actual size 5 1/2 inch x 10 1/4 inch)
	GD9 $23.95 Glass Dome for a 9 inch Anniversary clock. (Actual size 4 3/4 inch x 7 3/4 inch)
Weight Shells
	WS40P $20.00 Each One polished brass weight shell with end caps, hook, and center rod. Measures approximately 40mm x 232mm (1 9/16 inch x 9 1/8 inch)
	WS40B $28.00 Each One brushed brass weight shell with end caps, hook, and center rod. Measures approximately 40mm x 232mm (1 9/16 inch x 9 1/8 inch)
	WS60P $28.00 Each One polished brass weight shell with end caps, hook, and center rod. Measures approximately 60mm x 245mm (2 3/8 inch x 9 5/8 inch)
Chain
	HM Chain $9.95 Each 47 Links per foot. 70 inches long. 1.7mm thickness. Sold with Chain ends. Generally used on Hermle Grandfather and Grandmother clocks.
	UW Chain $9.95 Each 46 1/2 Links per foot. 56 1/2 inches long. 1.6mm thickness. Sold with Chain ends. Generally used on Urgos Grandfather and Grandmother clocks.
MISCELLANEOUS PARTS
	E-Clips/10 $0.75 Package of 10 assorted e-clips. Generally used on all German movements.
	Taper Pins/12 $1.00 Package of 12 assorted steel taper pins. Generally used to hold plates together on antique clocks; to mount dials to movements; and to hold suspension spring in place at the top.
Ratchet Wheel
	HRW380S $2.00 Hermle milled ratchet winding wheel for 340 & 350 movements when replacing mainspring.
Barrel Complete
	HBC40 $33.00 Spring and Barrel for Hermle 340-020 movements. #40 would be stamped on the barrel. Caution on Removal.
	HBC41 $35.00 Spring and Barrel for Hermle 340-020 movements. #41 would be stamped on the barrel. Caution on Removal.
	HBC50 $35.00 Spring and Barrel for Hermle series 350, 351, or 1151 movements. #50 would be stamped on the barrel. Caution on Removal.
	HBC52 $35.00 Spring and Barrel for Hermle series 350, 351, or 1151 movements. #52 would be stamped on the barrel. Caution on Removal.
	HBC56 $35.00 Spring and Barrel for Hermle series 350, 351, or 1151 movements. #56 would be stamped on the barrel. Caution on Removal.
	HBC11 $35.00 Spring and Barrel for Hermle series 350 and 351 movements. #11 would be stamped on the barrel. Caution on Removal.
Movements
All clock movements are subject to a 10% restocking fee
	HM340/020 $199.00 Hermle movement with Westminster chimes. Hammers are below the movement. Improved German design.
	HM1050/021 $269.00 Hermle Triple Chime movement. Hammers are below the movement.
	HM1050/020 $269.00 Hermle Triple Chime movement. Hammers are below the movement.
	HM350/060 $249.00 Hermle or Seth Thomas movement with Westminster chime.
Questions on what to order phone 989-652-2933 or e-mail our parts/repair department

RETURN TO TOP

Last Update July 28, 2010

While Frankenmuth Clock Co. makes every effort to publish accurate figures and product information, it assumes no liability for misinformation found on this web site. Copyright 1999-2009 Frankenmuth Clock Co, Inc . All rights reserved.

Clock Oilers and Grease

Books

Hand Nuts

Quartz Hands

Mechanical Hands

Winding Keys

Door Keys

Anniversary Clock Domes

Weight Shells